surface dry

surface dry
A condition in which the outer layer (surface) of the finish dries while the underneath remain soft and not thoroughly dried.

Dictionary of automotive terms. 2015.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Saturated-surface-dry — is defined as the condition of an aggregate particle or other porous solid when:* All permeable voids are filled with water * All exposed surfaces are dryIn this condition aggregates will not affect the free water content of a composite… …   Wikipedia

  • Dry suit — A dry suit or drysuit provides thermal insulation or passive thermal protection to the wearer while immersed in water,[1][2][3][4] and is worn by divers, boaters, water sports enthusiasts, and others who work or play in or near cold water. A dry… …   Wikipedia

  • Dry line — Idealized depiction of where a dryline is located around an extratropical cyclone A dry line (also called dew point line, or Marfa front)[1] separates moist air from the Gulf of Mexico (to the east) and dry desert air from the south western… …   Wikipedia

  • dry — [1] For paint, to lose its wetness often to the place where the surface is not even tacky. [2] For bearings, to lack grease or other lubricant. Also see air dry air dry hard dry surface dry touch dry …   Dictionary of automotive terms

  • Dry rot treatment — refers to the techniques used to eliminate dry rot fungus and alleviate the damage done by the fungus to human built wooden structures. The commonly held view of an outbreak of the dry rot fungus (Serpula lacrymans) within a building is that it… …   Wikipedia

  • Dry-ice blasting — used to clean a rubber mold Dry ice blasting is a form of abrasive blasting, where dry ice, the solid form of carbon dioxide, is accelerated in a pressurized air stream and directed at a surface in order to clean it. The method is similar to… …   Wikipedia

  • Dry ice blasting — is a process in which dry ice is accelerated in a pressurized air stream and directed at a surface in order to clean it. The method is similar to sand blasting, plastic bead blasting, or soda blasting but substitutes dry ice as the blasting… …   Wikipedia

  • Dry lubricant — Dry lubricants or solid lubricants are materials which despite being in the solid phase, are able to reduce friction between two surfaces sliding against each other without the need for a liquid media. Such lubricants, including materials such as …   Wikipedia

  • Dry quicksand — is loose sand whose bulk density is reduced by blowing air through it and which yields easily to weight or pressure. It acts similarly to normal quicksand, but it does not contain any water and does not operate on the same principle. Dry… …   Wikipedia

  • Dry lightning — is a term which is used to refer to lightning strikes occurring without significant precipitation. The term is a technical misnomer since lightning is obviously not wet in any instance, and also because the thunderstorms which sometimes cause it… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”